Kenwood DVR-505 - Manual (Page 18)

18
DVR-505/DVR-7000 (EN)
Operations
Let's put out some sound
Preparation
÷ set the POWER ON/OFF switch to the ON (
)
position.
POWER switch
INPUT
SELECTOR
keys
VOLUME CONTROL knob POWER
key
VOLUME
keys
MUTE
key
INPUT key
PHONES jack
Basic use method
Selecting the desired input
Volume adjustment
1
2
Muting the sound temporarily
Listening through headphone
REMOTE MAIN UNIT
REMOTE MAIN UNIT
To decrease To increase To decrease
To increase
Remote control unit only
÷ Press again to resume the original volume.
÷ The sound muting is also cancelled when the volume is con-
trolled.
÷ Press MUTE key.
Insert the headphone plug into the PHONES jack.
÷ The sounds from all speakers are cut off.
÷ When one of the keys on the left is pressed while STANDBY
mode, the power will be switched on automatically and the input
will be selected.
÷ The power will be switched on and the respective operation will
be performed also when the EJECT key, the PLAY/PAUSE key
or the BAND key on the main unit is pressed during STANDBY
mode.
÷ When a disc is set in the disc tray and the DVD CD key is pressed,
disc playback will start automatically.
In case of operation with the remote control unit, first select
the input or device to be operated wit the INPUT SELECTOR
keys etc., and then perform the desired operation.
The present mode of the remote control unit may not
coincide with the equipment to be operated.
This unit offers various surround modes, but it switches
automatically to stereo mode when headphones are connected.
To open the door, pull the lower part on the right side of the
main unit.
INPUT SELECTOR
DVD CD
AV AUX
RADIO VCR SAT
BAND
VOLUME
MUTE
1 Tuner (frequency display)
2 VCR (VCR/ANL)
3 SAT (SAT/ANL, SAT/COAX or SAT/OPTI)
4 AV AUX (AUX/ANL or AUX/OPTI)
5 DVD/CD
Switching is done as follows when the INPUT key of the
main unit is pressed.
Normally "MAX" is displayed when the volume settings set to
the maximum value.
Depending on the speaker setting value or when CINE.EQ has
been set to "ON", (
)), "MAX" will not be displayed.
The input mode can be switched with SAT and AV
AUX. Refer to “Changing the INPUT MODE”
W Note Note Note