Kathrein UFD 545 - Manual (Page 48)

Analogue Decoder Connection
48
Analoger Decoder-Anschluss
Since you can receive analogue channels with the receiver UFD 545, it can also be
connected to a decoder for analogue pay-TV channels.
Note No further setting is required on decoders that require a video signal and supply a
switching signal.
The video signal route of the receiver must be set to external for decoders that do
not supply a switching voltage (refer to section "Video menu").
Also take note of the instructions provided with the decoder!
Use a SCART cable to connect the decoder to the VCR/AUX SCART socket.
Modulator reception
A decoder cannot be used if satellite reception is transmitted via the
modulator output of the DVB receiver!