Kambrook ARCTIC KFA815 - Manual (Page 7)

7
Using Your Kambrook Arctic Tower Fan
Before First Use
Remove any promotional material
from the fan.
IMPORTANT: When
unpacking the fan, check
to see you have received
all the items listed in the
Parts List, before discarding
the packaging.
Assembling Your Arctic
Tower Fan
Base Assembly
1. Align half base (a) together with
half base (b). There are four
support posts on base (a), so
ensure all 4 are covered by base
(b). Firmly snap together the two
halves until the bases are locked in
place and flush. (Fig. 2).
Fig. 1
(a) (b)
Fig. 2
2. Turn the Tower Body upside
down. Place the assembled base
onto the underside of the Tower
Body, ensuring the cord clip is
positioned over the cord. Secure
all five screws.
NOTE: There are 2 different types
of screws. The 2 self tapping
screws are to be used along the
centre of the assembled base. The
3 machine type screws are to be
used in the 3 allocated holes.
3. Tuck the power cord under the
cord clip of the fan base.
4. Flip the tower into the upright
position, and it is ready to use.