6 technical specifications, Technical specifications, Table 6: technical specifications – Kramer Electronics COBRA R500A User Manual
Page 12
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
10
6 Technical Specifications
Table 6: Technical Specifications
1
of the Cobra R500A, Cobra R500-2
CABLE REQUIRED:
Category 5, 5e, 6 shielded or unshielded twisted pair
COMPLIANCE:
CE; FCC Class A, IC Class/class A
VIDEO SUPPORT:
To UXGA (1600x1200 @ 60Hz), RGBHV, RGB, Composite, s-Video,
Component Video modes
MAXIMUM RESOLUTION AND
REFRESH RATE:
At 500 ft. (152 m) or less, 1600 x 1200 at 70Hz
REQUIRED SOURCE IMPEDANCE: Video OUT: 75 ohms;
Audio OUT (if any): 600 ohms maximum
REQUIRED DESTINATION
IMPEDANCE:
Video IN: 75 ohms;
Audio IN (if any): 600 ohms minimum
AUDIO CHARACTERISTICS:
Channels: Right/Left summed;
Line Level 600 Ohm Unbalanced
SERIAL CHARACTERISTICS:
Protocol: Asynchronous; transparent to data format;
transparent to data rates up to 19.2 kbps duplex;
data rates to 115 kbps simplex
3 wire Tx, Rx, Gnd
CONNECTORS:
(1) 3.5-mm, (1) RJ-45, (1) HD15 F
TEMPERATURE TOLERANCE:
Operating: 32 to 104°F (0 to 40°C);
Storage: -4 to +140°F (-20 to +60°C).
HUMIDITY TOLERANCE:
Up to 80% noncondensing
ENCLOSURE:
Steel
POWER:
+5 VDC @ 260 mA max
Consumption: 1.3 watts maximum
SIZE:
0.88" H x 3.12" W x 3.75" D (2.2 x 7.9 x 9.5 cm)
WEIGHT:
0.56 lb. (0.26 kg)
1 Specifications are subject to change without notice