Kenwood KCA-20FM - Manual (Page 3)

Setting the FM
transmission frequency
1. Select a frequency from those listed on the diagram
on the right that has no station broadcasting on it in
your area
2. Use a small screwdriver to set the dip switches on
the side of the unit to the desired frequency
Note: Some radios may not be able to receive 87.7MHz
Using the KCA-20FM
• Use the toggle switch to select between the connect-
ed source and the vehicle’s radio.
• To listen to the connected source, set the vehicle’s
radio to the frequency selected above.
KCA-20FM Instruction Manual
4
Setting the FM Transmission Frequency
If this unit fails to operate properly, contact your dealer, or call 1-800-KENWOOD
Visit us on the Internet at: www.kenwoodusa.com
Stage 3 adjusted manual, please refer to last page for
switch position.