Kenwood KTC-HR100 - Manual (Page 4)

— 4 —
English
Sets the tuning mode.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the tuning mode
Press the [FM] or [AM] button.
Select the "Seek Mode"/"Auto1"/"Auto2"/"Manual" display.
3 Set the tuning mode
Tuning Mode
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD Radio"/"HD RADIO" display.
2 Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
HF1, HF2, and HF3 bands.
Press the [AM] button to select the HA band.
3 Tune up or down band
Press the [
4] or [¢] button.
• During reception of stereo stations the "ST" indicator is ON.
• Using the modes can be switched to digital
broadcast automatic switching, analog broadcast only, or digital
broadcast only.
• When "Digital" has been set with , the seek time
will be longer to allow a check of whether the transmission is a
digital broadcast.
Tuning
Sets the receive mode.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the Receive mode
Press the [FM] or [AM] button.
Select the "Receive Mode" display.
3 Open Receive mode
Press the [
4] or [¢] button for at least 1 second.
4 Set the Receive mode
Press the [FM] or [AM] button.
Each time the button is pressed the Receive mode switches as
shown below.
Receive mode Display Operation
Auto mode "Auto" Analog broadcasts and digital
broadcasts will be switched
automatically. When both are being
transmitted, the digital broadcast will
Receive Mode
Operations
Press the [ 4] or [¢] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode Display Operation
Auto seek "Auto 1" Automatic search for a station.
Preset station seek "Auto 2" Search in order of the stations in
the Preset memory.
Manual "Manual" Normal manual tuning control.
4 Exit Menu mode
Press the [MENU] button.