Keys Fitness ET530D - Manual (Page 4)

5 4
REMOVE ALL SECURITY TAPE AND WRAPPING
BEFORE BEGINNING.
1. Make sure that the three wires are extending from the top of
the Main Upright Tube (3) and that the Upright Cover (38) is
put on. Carefully slide the Main Upright Tube (3) upward into
the Main Frame (1) and attach with:
• One Bolt (11) with one Washer (37)
• One Carriage Bolt (41) with one Nylock Nut (31) and one
Washer (37)
You will need to tighten the Carriage Bolt (41), Nylock Nut
(31) and Washer (37), which was already in place.
Assembly of ET530D
2. Attach the Rail Tube (2) to the rear of the Main Frame (1) with
two Nylock Nuts (31), two Arc Washers (60), and two Carriage
Bolts (59).
1
2