Kompernass KH 2265 - Manual (Page 13)

English • 13
11.7. Turning on the random play function
The random play function can be used to play all songs of a
CD in random order. To turn on the random play function:
1 If a CD is being played, press the Stop button.
2 Subsequently press the Rand button on the remote con-
trol unit. All songs on the CD will be played in random
order. ”Rand” appears on the display screen.
3 To turn off the random play function: Press the Rand
button on the remote control unit again. ”Rand” will dis-
appear from the display screen.
11.8. Using the program function
You can use the program function to determine a sequence of
songs on a CD to be played in a certain order. You can deter-
mine the order that the songs should be played in. Up to 64
songs can be put together in a single sequence. To program a
sequence of songs.
1 First stop playing the inserted CD by pressing the Stop
button.
2 Press the Memory/Clk-Adj button. ”Prog”, ”00” and
”P-01” appear on the display screen.
For MP3 CDs: The folder number display blinks as well.
Select the folder containing the first song to be pro-
grammed. To do this, press the Up/FF or Down/REW
button. Press the Memory/Clk-Adj button as soon as
the number of the desired folder appears on the display
screen. The song number blinks on the display screen.
3 Select the song to be programmed first. To do this, press
the Up/FF or Down/REW button. The number of the
currently selected song appears on the display screen.
4 Press the Memory/Clk-Adj button as soon as the
number of the desired song appears on the display
screen. This song is now programmed as the first song in
your sequence. ”P-02” appears on the display screen for
the second song to be programmed.
5 Repeat steps 3 and 4 repeatedly until you have compiled
the desired sequence of songs.
6 After having programmed the last desired song, press
the CD / Play/Pause button. The programmed song se-
quence will now be played. ”Prog” will appear on the
display screen while the programmed song sequence is
being played.
ô Note:
You can also turn on the repeat function while playing a
song sequence. Turning on the repeat functions is described
in chapter 11.6.
7 If you want to pause playing the song sequence: Press
the CD / Play/Pause button. The time already played of
the current song will blink on the display screen.
8 If you want to stop playing the song sequence: Press the
Stop button.
9 After the song sequence has been played, the number of
songs and the total duration of the CD will appear on
the display screen. The programmed song sequence re-
mains in memory. This also applies if you stop playing
by pressing the Stop button. If you would like to listen to
the song sequence again: First press the Memory/Clk-
Adj button and then the CD / Play/Pause button. The
programmed song sequence will now be played again.
The programmed song sequence is deleted if …
Ú the CD compartment is opened,
Ú the mini hi-fi system is switched to standby mode
Ú or the main switch on the back of the subwoofer is
turned off.
11.9. Displaying additional
information (only for MP3 CDs)
MP3 files are often saved with additional information (e.g.
name of the artist, album, etc.). To display this additional in-
formation:
1 Hold the Find/Stereo button pressed while a song is be-
ing played.
2 All available information for the current song will ap-
pear on the display screen. The following information is
displayed …
Ú File: Name of the MP3 file
Ú Title: Title of the song
Ú Artist: Artist or group performing the song
Ú Album: Name of the album
ô Note:
Additional information is only displayed if this information
was entered upon saving the MP3 file. As the case may be,
some songs have no additional information or not all of the
IB KH2265 EN IE.indb 13 09.10.2004 18:44:23 Uhr