Kraus USA Kralin Wireless Access Point 54MB Single Port Cod. KR.XJ - Manual (Page 14)

www.kraun.it 14
User’s Manual
3) Click on Properties. The following TCP/IP Properties window will dis-
play and the IP Address tab is open on this window by default.
4) Now you have two ways to configure the TCP/IP protocol below:
• Assigned by DHCP Sever
a. Select Obtain an IP address automatically, as shown in the figure
below:
Figure B-4: IP Address tab
b. Do not type anything into the New gateway field on the Gateway
tab.
Figure B-5: Gateway tab
c. Choose Disable DNS on the DNS configuration tab, as shown in
the following figure:
Figure B-6: DNS Configuration tab
• Setting IP address manually
a. Select Specify an IP address on IP Address tab, as shown in the
following figure. If the AP’s LAN IP address is 192.168.1.1, type IP
address is 192.168.1.x (x is from 2 to 254), and subnet mask is
255.255.255.0.
Figure B-7: IP Address tab
b. Type the AP’s LAN IP ad-
dress (the default IP is
192.168.1.1) into the
New gateway field on
the Gateway tab, and
click on the Add button,
as shown in the figure:
Figure B-8: Gateway tab