Konica Minolta DiMAGE X1 - Manual

DiMAGE X1 Specifications
Number of effective pixels 8.0 million (approx.) (**3296 x 2460)
CCD 1/1.8-type interline primary-colour CCD **Total pixels: approx.
8.3 million (3320 x 2496)
Focal length 7.7 - 23.1mm (equivalent to 37 - 111mm in 35mm format)
Max. aperture f/3.5 - f/3.8
Focusing range Wide-angle: 0.1m to infinity, Telephoto: 0.4m to infinity (from
front of camera)
Maximum magnification: 0.12 x (equivalent to 0.56x in 35mm
format) (Focal length: 13.0mm, equivalent to 62mm in 35mm
format, shooting distance: 10cm)
Area covered at maximum magnification: 61 x 46mm
Super Macro: 0.05m to infinity (from front of camera) (Focal
length: 13.0mm, equivalent to 62mm in 35mm format)
Maximum magnification: 0.21x (equivalent to 1.02x in 35mm
format)
Area covered at maximum magnification: 34 x 25mm
Recording media SD (Secure Digital) Memory Cards, Multimedia Cards
File format Still Image: JPEG, DCF2.0-compliant, DPOF-compliant
(supported by printing functions in ver. 1.1) (On/off selectable on
both index print and date imprinting), Exif 2.2.
Movie: Motion JPEG (MOV) with monaural audio.
Voice: WAVE (monaural audio only)
Number of recorded pixels 3264 x 2448, 2560 x 1920, 2048 x 1536, 1600 x 1200, 640 x 480
Image quality modes Fine, Standard, Economy
LCD monitor 2.5-inch (**6.3cm) low-temperature polysilicon TFT colour, Total
pixels: 118,000 (approx.), Field of view: 100% (approx.)
Autofocus system Video AF
Autofocus area Changeable between spot and wide (five-point AF)
Exposure mode Programmed AE
Metering Multi-segment (300 segments), Spot metering
Exposure compensation +/-2 Ev in 1/3 increments
Camera sensitivity Automatic, ISO 50, 100, 200 equivalents.
**Automatic: between ISO 50 - 160 equivalent. **When the flash
fires, the automatic sensitivity gain is between ISO 50 - 160
equivalent.
Shutter CCD electronic shutter and mechanical shutter
Shutter speed range 1- 1/1250 s
Flash metering Pre-flash TTL
Guide number Approx. 6.5(in meters at ISO 100)
White balance control Automatic, Preset (Daylight, Cloudy, Tungsten, Fluorescent),
Setting possible in movie recording mode (Same with still
images)
**Method: TTL