Kenwood DPF-3030 - Manual (Page 11)

11
Operation of remote control unit
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In such a case, change the system installation position to prevent the malfunction.
Loading batteries
The keys with the same name as those on the main unit operate the same way as the main unit.
The keys marked * are provided only on the remote control unit.
* 2 OUTPUT (DOWN, UP) key 7
3 Numeric keys ( 1 1 1 1 1 ~ ) ) ) ) ) , 0 0 0 0 0 )
#
4 Basic function keys
Skip keys ( 4,¢) #
Search keys ( 1,¡) #
Stop key ( 7) @
Play/Pause key ( 6) @
1 Program-related and other keys
RANDOM key
)
REPEAT key
^
P.MODE key
$
TIME DISPLAY key
#
EDIT key
*
CHECK key
%(
CLEAR key
%(
Model: RC-P0305
Infrared ray system
÷ When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
After plugging in the power cord, press the POWER switch
of the main unit to turn the unit ON. When the unit is turned
ON, press the key of the function to be operated.
1 Remove the cover. 2 Insert batteries. 3 Close the cover.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
Operation
Operating range
(Approx.)
Remote control
light sensor
RANDOM
DISC SELECTOR DISC SELECTOR
OUTPUT
1 2 3
4 5 REPEAT
DOWN UP
DISC SKIP DISC SKIP
1 2 P.MODE 3
4 5
TIME
DISPLAY 6
EDIT 7 8 9
CHECK 0 +10
CLEAR 6
4
7
¡
¢
REMOTE CONTROL UNIT
RC-P0305
1
1
4
3
2
Notes Notes
1
2
1
2
0
30
6m
30
REMOTE CONTROL UNIT RC-P0305