Keys Fitness CARDIOZONE E-CZ100 - Manual (Page 6)

6
Getting Started - The CardioZone E-CZ100 Elliptical will require some assembly. Unpack the
box in a clear area. Remove packing material. Do not dispose of packing material until assem-
bly is complete and unit is working properly. Place the unit on a clean level surface for assem-
bly. Make sure there is easy access to an electrical outlet. Before assembling the unit should
be placed as close as possible to its final location. Tools have been provided for use while
assembling this product.
Assembly
Figure 1
Step 1:
Secure rear stabilizer to the
main frame using four M8x1.25-
16 screws and M8.2x18-2 flat
washers on the top four holes,
and three M10x1.5-20 bolts and
M10x20-2 flat washers on the
three holes located on the bot-
tom of the rear stabilizer.
M10X1.25-20 BOLT
M8X1.25-16 BOLT
M8.2X18-2 FLAT WASHER
REAR STABILIZER
Figure 1
M10x20-2 WASHER
Figure 2
Step 1:
Connect the toggle wire com-
ing from the right handlebar to
the toggle wire coming from the
main frame.
Step 2:
Secure right handlebar to main
frame using four M8x 1.25-16
screws. Attach the cover over
the handlebar and secure using
two M5x0.8-12mm screws.
Figure 2
M8X1.25-16
SCREW
M5X0.8-12MM SCREW
COVER
RIGHT HANDRAIL
TOGGLE WIRES
TOGGLE WIRES