Kyocera Torino S2300 - Manual (Page 49)

User Guide 49
1. From QuickText, do one of the following:
– Scroll to a preset message and select
Edit.
– Select New Msg to create a new preset
message.
2. Enter or edit the text.
3. Select Save.
Note: You can also save messages you have
written or received as preset messages.
Enable Auto Retrieve
From Auto Retrieve, select one of the
following:
•
Disabled turns off auto retrieve and
prompts you before downloading any
multimedia messages.
• Enabled turns on auto retrieve to
automatically download multimedia
messages.
Enable CC/BCC Fields
From CC and BCC, select Disabled (to hide
the CC and BCC fields) or Enabled (to show
them).
Set Callback Number
1. From Callback Number, enter a new
number to change your default callback
number.
2. Select OK to save the number.
Enable Save to Sent
From Save to Sent, select Enabled to
automatically save outgoing messages to the
Sent Msgs folder.
Enable Auto-Erase
Use Auto-Erase to set your phone to erase
messages automatically when it needs memory
for incoming messages.
From Auto-Erase, select one of the following:
•
Disabled erases no messages.
• Inbox Msgs erases old messages in Inbox
when memory is needed.
• Sent Msgs erases old messages in Sent
Msgs when memory is needed.
• Both erases old messages in both Inbox
and Sent Msgs when memory is needed.
Set Default Text
You can change the default text entry mode
when creating a text message. This setting
applies only to the Message field, not the Send
To field.
From Default Text, select Normal Alpha (to
enter text letter by letter) or Rapid Entry (to
enter text with word recognition).
Request Text Message Receipts
From Text Msg Receipt, select Request to
request a notification when a recipient has
received your text message.