Kunz MR44K - Manual (Page 7)

bolts, lock washers and nuts holding the cross
brace tubes in place. This step insures that proper alignment of the carrier arms has been
achieved.
Figure 3: Cross Brace Tube Installation
Figure 4: Height Adjust Assy. Installation
Height Adjust Assy. Cross Brace
Tube
1/2” x 3” Bolt
Screw Mounting
Flat
Height Adjust
Assy.
1/2” x 1” Bolt
Screw
Lower Deck
Mount
4. Turn the crank on the height adjust assy. and raise the mower to its highest position. At this
time securely tighten the 1/2” x 3” hex head
6