Kompernass KH 2190 - Manual (Page 15)

13 KH 2190
GB
IE
Handling and operation
Programming alarm times
When programming the alarm times, you can select whether,
at the programmed time, alarm tones should sound or the radio
should start playing. Two diff erent alarm times (Alarm 1/Alarm 2)
can be programmed.
Press and hold the AL.1 button ‹
15 resp. AL.2 button 14 .
Press and hold the UP button ‹ 9 resp. DOWN button 8 to set
the time.
Release the AL.1 button ‹
15 resp. AL.2 button 14 when the desired
alarm time is displayed in the display 4 . The programmed alarm
time is automatically taken over as soon as the AL.1 button 15
resp. AL.2 button 14 is released.
NOTE
If you wish to check the programmed alarm time, press the ►
AL.1 button 15 resp. the AL.2 button 14 . The programmed
alarm time appears in the display 4 . Release the AL.1 button
15 resp. AL.2 button 14 to return to the current time display.
Switching the alarm function on
Place the OFF AL1/2 AL2 AL1 switch ‹ in the desired position.
The alarm function is now activated. As a control, a point appears
in the display
4 to the left or right.