Kenwood KVT-911DVD - Manual (Page 40)

40
Name Set Function
Station Name Preset (SNPS) /Disc
Name Preset (DNPS)
If the cursor is in the desired character input
position, go on to step 4. If not touch either
[
2 ] or [ 3 ] to move the cursor to the desired
position.
Touching [
2 ] moves the cursor to the left and
touching [ 3 ] moves it to the right.
Touch [ ] or [ ] to switch the character lists.
Touch a character.
Continue steps 1 and 3 until all the characters
have been input for the name.
• You can enter up to 16 characters for each name.
• To enter a space, touch [ SPACE ].
Touch [ RTN ] to finish name entry and leave the
name preset mode.
• If you want to change the name of a station, first
display the name of the station (following step 1),
then change the letter(s) that you by following
steps 2 and 3.
• You can assign names for up to 20 TV stations.
• You can assign names to up to 30 FM/AM
stations in all.
• You can only store names for up to 100 CDs.
101st Disc Name Preset is made, the oldest
disc name will be automatically erased to make
room for the new setting.
• CDs are identified by their total length and
number of tracks. If you play another CD that
happens to have exactly the same specifications
as another CD whose name is stored, the wrong
name may be displayed.
NOTE
5
NOTE
4
3
2
1
Name Set Screen
KVT_911DVD_Eng_01 02.1.25 2:25 PM Page 40