General features – Kenwood KDC-MP2032 User Manual
Page 10
10
|
English
General features
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting
alternates between the settings shown in the
table below.
Speaker type
Display
OFF
"SP OFF"
For 5 & 4 in. speaker
"SP 5/4"
For 6 & 6x9 in. speaker
"SP 6*9/6"
For the OEM speaker
"SP OEM"
4
Exit Speaker Setting mode
Press the [VOL] knob.
Switching Display
Changing the information displayed.
1
Enter Switching Display mode
Press the Control knob for at least 1 second.
"DISP SEL" is displayed.
2
Select the Display item
Push the Control knob towards [
4] or
[
¢].
In Tuner source
Information
Display
Frequency
"FREQ"
Clock
"CLOCK"
In CD & External disc source
Information
Display
Disc title (In External disc source or KDC-
MP2032/MP2032CR/MP232/MP202
internal CD source)
"D-TITLE"*
Track title (In External disc source or KDC-
MP2032/MP2032CR/MP232/MP202
internal CD source)
"T-TITLE"*
Track number & Play time
"P-TIME"
Clock
"CLOCK"
In Audio file source
Information
Display
Song title & Artist name
"TITLE"*
Album name & Artist name
"ALBUM"*
Folder name
"FOLDER"
File name
"FILE"
Track number & Play time
"P-TIME"
Clock
"CLOCK"
In HD Radio source
Information
Display
Station name
"ST NAME"*
Song title/ Artist name/
Album name/ Genre
"TITLE"*
Frequency
"FREQ"
Clock
"CLOCK"
In Standby/ Auxiliary input source
Information
Display
Source name
"SRC NAME"
Clock
"CLOCK"
3
Exit Switching Display mode
Press the Control knob.
• * If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
• Album name cannot be displayed in WMA file.