Kambrook EASY STEP KES110 - Manual (Page 10)

10
• Switch the power ‘OFF’ at the
power outlet, unplug the power
cord, remove all steam pressure
and allow the appliance to cool.
• Do not remove the water tank
cap or the filter holder until the
steam pressure in the appliance
has been released. The Pressure
Indicator Button should drop
down and be flush with the top of
the water tank cap.
WARNING: To avoid
splattering of hot milk,
do not lift the steaming
nozzle above the
surface of the milk
while frothing.
Ensure the selector
control is in the
‘STaNDBy’ position
before removing the
frothing jug.
How to Release the
Steam Pressure
• Switch the power off at the power
outlet and unplug the power cord.
• Place the frothing jug under the
steam nozzle.
• Turn the selector control to the
‘STEAM’ position and allow
all steam and residual water to
completely drain off into the
jug until all flow and sound
ceases. The steam pressure is
now removed.
Operating Instructions
continued
• Turn the selector control to the
‘BREW’ position to ensure steam
pressure is removed, then turn
back to the ‘STANDBY’ position.
• The Pressure Indicator Button
should drop down and be flush
with the top of the water tank
cap. (See Fig.5)
Fig. 5
Pressure
Indicator
Down
WARNING: The metal
parts of the filter holder
might still be very hot.
Cool down these parts
by running under
cold water.
To avoid possible burns
from hot steam and
water, never remove the
water tank cap or the
filter holder while there
is steam pressure in the
water tank. Remove all
steam pressure first.
Never let coffee or water
level in a cup reach the
pouring nozzle of the
filter holder.
KES110_IB_FA.indd 10 2/12/09 8:37 AM