Kenwood KW85 - Manual (Page 21)

8
TIMER FUNCTION
When the air conditioning unit is off (but plug-
ged into the outlet), to turn it on at the required
time press the "TIMER ON/OFF" button (" "
will appear on the display), then press the
"TIMER HOUR" button until the number of hours
to elapse before the appliance comes on
appears on the display. Vice versa, when the
air conditioning unit is on, to turn it off at the
required time press the "TIMER ON/OFF" button
(" " will appear on the display), then press
the "TIMER HOUR" button until the number of
hours to elapse before the appliance goes off
appears on the display. The timer can be set
from one to 12 hours.
AUTOMATIC SWING FUNCTION
Press the “SWING“ button once. The fins will
swing, distributing the air flow in the room.
Press the button again, the flow will be steady
in one direction.
CHILD SAFETY
Pressing the "+" and "-" buttons on the control
panel together for more than two seconds
locks the keypad.
The " “ symbol appears on the LCD display.
The same keypad lock function can be acti-
vated on the remote control unit by pressing
the “ “ button.
To unlock, repeat the operation.
BEFORE USING THE APPLIANCE
1. If the appliance has been in a horizontal
position during storage or transport, you
are recommended to wait at least three
hours before turning it on.
2. Always position the air conditioning unit on
a stable surface.
3. Attach the air exhaust hose to the air con-
ditioning unit.
4. Plug the air conditioning unit into a suitably
rated outlet.
5. Set the various functions of the air condi-
tioning unit according to your require-
ments.
6. The cooling system will shut down when
room temperature drops below the set
temperature. The fan will, however, conti-
nue to operate at the set speed.
If the room temperature rises above the
temperature set, the cooling system
comes on again automatically.
O p e ra t i o n
GB/KW85 17-11-2003 19:21 Pagina 8