beautypg.com

Save these instructions – Kenwood KW85 User Manual

Page 15

background image

2

I m p o r t a n t s a f e g u a rd s

Use this appliance only as described in this instruction manual.
As with any electrical appliance, the instructions aim to cover as many eventualities as possi-
ble. Caution and common sense should be used when operating and installing this air condi-
tioner.

This appliance has been manufactured to cool and dehumidify domestic environments and
should not be used for other purposes.

It is dangerous to alter or modify the unit's characteristics in any way.

The appliance must be installed in line with the relevant national legislation.

Should repairs be necessary, contact the nearest authorized

De’Longhi Repair Service Center.

Unauthorized De’longhi

servicing can be dangerous.

This appliance is to be used by adults only; keep away from children.

In the case that the power cord becomes damaged, this must be replaced only by specialized per-
sonnel authorized by the manufacturer.

Always ensure the appliance is grounded. If you have any doubts check with a qualified elec-
trician.

Avoid using extension cords with the unit.

Before cleaning or maintenance operations, always unplug the unit from the outlet.

Do not pull on or place strain on the power cord when moving the appliance.

The appliance should not be installed where the atmosphere may contain combustible gases,
oil or sulphur, or near heat sources.

Do not rest hot or heavy objects on the appliance.

Clean the filters at least once a week.

Avoid using heaters near the unit.

The unit should be transported in a vertical position. If this is not possible secure the unit at
an angle, do not lie it horizontally.

Before transporting the unit, drain the condensation collecting-tray and tank. After transporta-
tion, wait at least 1 hour before switching on the unit.

The packaging materials can be recycled. You are therefore recommended to place them in
the special containers for differentiated waste collection.

SAVE THESE INSTRUCTIONS

GB/KW85 17-11-2003 19:21 Pagina 2