beautypg.com

Karcher K 2.110 M User Manual

Page 7

background image

English

7

Danger

The trigger gun is subjected to a recoil force
when the water jet is discharged. Make sure
that you have a firm footing and are also hold-
ing the trigger gun and spray lance firmly.
Î

Unlock the lever on the trigger gun.

Î

Pull on the lever of the trigger gun; the
device will switch on.

Note: Release the lever of the trigger gun;
the device will switch off again. High pres-
sure remains in the system.

Carrying out the most common cleaning
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".
Î

Release the lever on the trigger gun.

Î

Turn the spray lance to the desired po-
sition.

For particularly dirty items or areas.
Not suitable for use with detergents.

Suitable for use with detergents.

Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were
specifically developped for your appliance.
The use of other detergents and care prod-
ucts may lead to premature wear and can
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.
Î

Pull detergent suction hose as far as is
required out of the housing.

Î

Suspend end of detergent suction hose
in a container filled with detergent.

Î

Use spray lance with pressure regula-
tion (Vario Power).

Î

Turn the spray lance to "Mix" position.

Î

Spray the detergent sparingly on the
dry surface and allow it to react, but not
to dry.

Î

Spray off loosened dirt with the high-
pressure jet.

Î

Release the lever on the trigger gun.

Î

Lock the lever on the trigger gun.

Î

During longer breaks (more than 5 min-
utes), also turn the appliance off using
the "0/OFF" switch.

Î

Insert the trigger gun in its holder.

Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there
is no pressure in the system.
Î

After operation with detergent: Fill the
detergent tank with clear water, turn the
spray lance with pressure regulator to
the position "Mix", switch the appliance
on for about 1 minute and rinse with
clear water.

Î

Release the lever on the trigger gun.

Î

Turn off the appliance "0/OFF".

Î

Turn off tap.

Î

Detach the appliance from the water
supply.

Î

Press the lever on the trigger gun to re-
lease any remaining pressure in the
system.

Î

Lock the lever on the trigger gun.

Î

Pull out the mains plug.

Î

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.

Operation

Spray lance with pressure regulation

Spray lance with Dirtblaster

Washing brush

Working with detergent

Recommended cleaning method

Interrupting operation

Finish operation