Kompernass KH 6500 - Manual (Page 9)

- 7 -
6. Connections and con-
nection potentials
In order to use the device you need only to provide
a power supply. You can connect it to a power
socket via the rechargeable battery or you can
run it with the 12V vehicle adapter.
In addition the device can be connected to other
input and output devices:
• with a television set
• with a video or DVD recorder
• with a receiver, also, for example, a stereo
system
• with a Dolby Digital system
Attention!
Make sure that all devices are switched off be-
fore you connect them. Do not plug the device
into the mains power until all connections have
been made.
6.1 Mains power connection
Connection with the power supply unit
1. Plug the device plug of the supplied power supply
unit into the socket 2$ on the side of the device.
2. Plug the power supply unit into a power socket.
Connection with the 12V vehicle adapter
1. Plug the device plug of the 12V vehicle adapter
into the socket 2$ on the side of the device.
2. Plug the 12V vehicle adapter into a suitable socket,
for example, the cigarette lighter connection in
the vehicle.
Note:
- The supplied 12V vehicle adapter may only
be used on 12V supply systems.
- The DVD player may only be operated
with the supplied 12V vehicle adapter.
- Do not use the supplied 12V vehicle adapter
on other devices.
- After use, remove the 12V vehicle adapter
from the DVD player and from the vehicles
power socket.
IB_KH6500_V5557_UK_V2_EN.qxd 21.08.2007 12:34 Uhr Seite 7