Kenwood KRC-21R - Manual (Page 16)

Cassette player features
(See page 6)
English
— 16 —
Playing Cassette Tapes
Loading and Playing Cassettes:
Load a cassette with the tape exposed on the right.
The tape starts playing automatically.
With Side A facing up, the
3 indicator lights up when Side A is
playing, and 2 when Side B is playing.
The 2 3 indicator lights up whilst play is paused.
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until tape mode is obtained.
"TAPE" is displayed when the tape mode has been selected.
Listening to the other side:
Press the FF button and REW button at the same time.
Tape play switches to the other side.
Stopping and Ejecting Cassettes:
Press the 0 button.
The tape stops playing and the cassette ejects.
Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
NOTE
Fast Forwarding and Rewinding Cassette Tapes
Fast Forwarding Tapes:
Press the FF button.
If the REW button is pressed, normal tape play returns.
Rewinding Tapes:
Press the REW button.
If the FF button is pressed, normal tape play returns.
Tuner Call Function
Switch automatically to the tuner whilst you are rewinding or
fast forwarding the tape.
Turning Tuner Call Function On/Off:
Press the T.C button to switch the tuner call function on and
off.
The T.C indicator lights up when the tuner call function is
turned on.