beautypg.com

Operating instructions, Before first use, Operation of your kettle – Kambrook KSK65 User Manual

Page 7

background image

7

Operating Instructions

Before First Use

Remove any packaging materiel and

promotional labels before using your

kettle for the first time.
It is recommended that before first

use to fill to the kettle to the maximum

level with cold tap water, bring to the

boil and discard the water.
Your kettle will only operate when

positioned on the power base with the

ON/OFF switch in the “ON” position.
The kettle will automatically switch

“OFF” once the water is boiled.

Operation of Your Kettle

1. To fill the kettle, remove it from the

power base and open the lid by
pulling up.

(see Fig. 1) Fill with the desired

amount of water. Never fill the

kettle above the ‘MAX’ mark,

which is indicated on the water

window. Too little water will result in

the kettle switching “OFF” before

the water has boiled.

NOTE: Never operate the kettle

dry – too little water will results

in the kettle switching “OFF”.

NOTE: Do not fill above the MAX

mark on the water window as

boiling water may splash out

from the kettle.

2. Ensure that the lid is closed and

locked firmly into place before
placing the kettle on the power
base.

3. Place the kettle firmly onto the

power base. Plug the power cord

into 230V or 240V power outlet

and switch ‘On’.

NOTE: This kettle must only

be used with the power base

supplied. Use caution when

pouring water from your kettle

as boiling water will scald. Do

not pour the water too quickly.

4. Press the On/Off switch to the ‘ON’

position. The power ‘ON’ light will
illuminate.

5. The Kettle will automatically switch

‘OFF’ once the water has boiled.

Lift the kettle from the power base

and pour the water. Take care to

hold the kettle level, especially

when filled to the maximum level.

To re-boil it may be necessary to

wait for a few seconds to allow

the control to reset.

NOTE: Do not remove the kettle

from the power base during

operation. Ensure the kettle has

switched to “OFF” position after

the water has boiled before

removing the kettle from power

base.

Lift the kettle from the power base
and pour the water.

WARNING: This

appliance is designed

for the boiling of water

only, never use it to heat

or boil any other liquids

or foodstuff. The lid

should always be firmly

in place when using.

KSK65_IB_FA.indd 7

18/11/09 9:35 AM