Kenwood TK-372G User Manual
Page 5
save both time and expense (requires optional programming cable and software).
Power Output Settings
Programmable power levels provide one of two settings (High/Low) for each of the
channels so the radio can be tailored for mixed transmit range requirements. Output
levels can be programmed at 5W/1W on VHF and 4W/1W on UHF.
ANI Function
Two types of ANI - PTT ID (per channel) and DIAL ID - send connect and disconnect ID
information. Repeater/RIC access is enabled through key operation or ID transmit with
PTT set to On.
Scan With Priority
Channel scanning provides users with an easy way to monitor multiple channels for
activity. Priority Scan enables the radio to automatically check for activity on an
important main channel during the channel scan sequence and while receiving a call on
another non-priority channel. Multi-group and single group scans are available to limit
scanning to the currently selected group or to scan all channel groups.
Dead Beat Disable (D.B.D.)
Useful when functions of the radio need to be rendered unusable, reception of a pre-
determined DTMF signal can either disable the units' signal transmission, or prohibit
signal transmission, while muting signal reception volume.
Embedded Message
The radio's flash memory can store an electronic message containing owner
identification, property I.D. numbers, user and department names, service records, etc.
A radio can be electronically identified even if external labels, markings or factory serial
numbers have been removed.
SmarTrunk™ Omni Board Compatable
Expand to conventional and conventional system capacity with the OMNI board,
available from the SmarTrunk™ Corporation.