4 to execute the erase measure command, press the, 2 when you choose delete measure, the dia2 log box, 3 if you wish to delete measures from all 3 tracks – KORG TRINITY HDR-TRI User Manual
Page 38: 4 to execute the delete measure command, press the, Introduction operation parameters appendix
Sequencer P5
35
Introduction
Operation
Parameters
Appendix
4
To execute the Erase Measure command, press the OK button. To cancel
without executing, press the Cancel button.
Be aware that if this command is executed with “All” selected for Kind and
the All Tracks box checked, any control data in MIDI tracks which spans the
boundary of the erased and non-erased sections will be erased only in the
specified area. Also, erasing measures through which a note is held (i.e.,
measures falling within the duration of a note) will cause that note data to be
erased from subsequent measures as well.
5–3F: Delete Measure
This command deletes specified measures of playback data from the track spec-
ified in the tab 3 page.
Unlike the Erase Measure command, executing the Delete Measure command
will cause the playback data of subsequent measures to move toward the begin-
ning of the song to fill the gap.
Kind
All Tracks
Checked
Un-checked
All
MIDI tracks, master track, audio events
and mixer events of the audio tracks
Audio events and mixer events of the
selected audio track
Audio Event
Audio events of audio tracks 1–4
Audio events of the selected audio track
Mixer Event
All mixer events of audio tracks 1–4
All mixer events of the selected audio
track
EQ
Equalizer events of audio tracks 1–4
Equalizer events of the selected audio
track
Send 1/2
Send 1/2 events of audio tracks 1–4
Send 1/2 events of the selected audio
track
Pan
Panpot events of audio tracks 1–4
Panpot events of the selected audio
track
Volume
Volume events of audio tracks 1–4
Volume events of the selected audio
track
1
In the tab 3 page, specify the audio track from which measures are to be
deleted, and the Start Measure and End Measure.
2
When you choose Delete Measure, the dia-
log box at right will appear.
3
If you wish to delete measures from all
tracks including the MIDI tracks, check the
All Tracks box.
If this box is not checked, measures will be
deleted from the audio track specified in
the tab 3 page.
4
To execute the Delete Measure command, press the OK button. To cancel
without executing, press the Cancel button
2
1
5
4
3
1
4
5
2
3
No data
Example: If measures 2–3 are erased, measures 2–3 will be blank.
Before Erase
After Erase