Kenwood MD-RECEIVER KMD-870R - Manual (Page 25)

You can dim the display.
The dimmer function is not available for units if the dimmer cable
is not connected.
Turning Dimmer On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Dimmer function
appears in the display.
Press the
4 button to search in the other direction.
The function setting is indicated by "DIM ON" or "DIM OFF" in
the display, indicated that the current dimmer setting is on or
off, respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
2
1
NOTE
Dimmer
Graphic display
Track time (Only during disc play)
Track number (Only during disc play)
Clock
You can change the display in each mode.
Changing the Display:
Each time you hold down the CLK button for one second or
more, the display changes as follows:
Switching Display
This function permits the graphic display to be switched to one
that is linked with the volume level value or to display various
modes. The initial setting is ON (displaying various modes).
Turning the Graphic Display On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Switching Graphic
Display function appears in the display.
Press the
4 button to search in the other direction.
The function setting is indicated by "GRAP ON" or "GRAP OFF"
in the display, indicating that the Graphic display is on or off,
respectively.
"GRAP ON" (The graphic display works.)
"GRAP OFF" (The graphic display does not work.)
Switching settings
Press either the AM button or FM button.
The display and setting will change.
Press the MENU button to end the menu mode. 4
3
2
1
Switching Graphic Display
— 25 —