Kawai CN21 - Manual (Page 24)

Page
24
FUNCTION MODE
5
5. FUNCTION MODE
The Function Mode provides access to many other useful features of the CN21 piano.
1) BASIC OPERATIONS
Step 1
Press and hold the METRONOME and SOUND SELECT buttons at the same time, then press one of the
15 lowest keys assigned to the desired function.
The LED indicators for the METRONOME and SOUND SELECT buttons will start to fl ash while the settings are
made.
„ If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be
used.
Step 2
While still holding down the METRONOME and SOUND SELECT buttons, press the '- (off)' or '+ (on)'
keys to change the value for the selected function.
„ W h i l e h o l d i n g d o w n t h e
METRONOME and SOUND SELECT
buttons, it is possible to select other
f u n c t i o n s, c h a n g i n g e a c h va l u e
successively.
Step 3
Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.
„ When the power is turned off, Function Mode settings will be reset to the factory default
values, shown below.
Function Default
TOUCH Normal
TRANSPOSE 0
TUNING A4=440.0Hz
REVERB On
CONCERT MAGIC MODE Mode 1
MIDI CHANNEL SELECT 1ch
MIDI LOCAL CONTROL ON/OFF On
MULTI TIMBRAL MODE ON/OFF Off
TRANSMIT MIDI PROGRAM CHANGE On
Use the enclosed 'function label'
(page 8) for your convenience.
Hold down the button. number keys
+ -
on off
0 9 8 7 6 5 4 3 2 1
9 TRANSMIT MIDI PR
OGRAM CHANGE
8 MUL
TI
TIMBRAL MODE ON/OFF
7 MIDI LOCAL CONTR
OL
6 MIDI CHANNEL SELECT 5 CONCER
T MA
GIC MODE
4 REVERB 3 TUNING 2 TRANSPOSE 1 TO
U
C
H
MIDI settings