Getting to know your microwave oven, Microwave oven features, Crisper pan – KITCHENAID KHMS147H User Manual
Page 8
LIGHT
ON / OFF
FAN
ON / OFF
POPCORN
COOK
TIME
TURNTABLE
ON / OFF
TIMER
SET / OFF
OFF /
CANCEL
PREVIOUS
SCREEN
BOOKMARK
FIRST
SCREEN
8
8
Getting to Know Your Microwave Oven
Crisper pan:
This specially-designed microwave pan (PN 4393536)
lets you cook crispy pizza, sizzle
chicken, fry breakfast foods like
eggs and sausage, or prepare
juicy hamburgers. See the “Pan
Brown” section on in your
MICRO-DIAL control display.
Your microwave oven is designed to make your
cooking experience as enjoyable and productive as
possible. To help get you up and running quickly, the
following is a list of the oven’s basic features:
1. Door Handle. Pull to open door.
2. Door Safety Lock System. The oven will not
operate unless the door is securely closed.
3. Window with Metal Shield. Shield prevents
microwaves from escaping. It is designed as a
screen to allow you to view food as it cooks.
4. Cooking Rack. Use for extra space when
cooking in more than one container at the same
time (See Page 21).
5. Glass Turntable (PN 4393751) (not shown).
Included in oven cavity – see below for installa-
tion instructions. This turntable rotates food as it
cooks for more even cooking. It must be in the
oven during operation for best cooking results.
The turntable is sunken into the cavity floor to
give you more cooking space and better cooking
results.
6. Charcoal and Grease Filters. Packed in oven
cavity during shipment.
7. Cooktop/Countertop Light. Turn on to light your
cooktop or countertop or turn on as a night light.
8. Cooking Guide Label. Use as a quick reference
for various oven functions.
9. Exhaust Fan and Cooktop Light Pads.
10. Control Panel. Touch the pads or operate the
MICRO-DIAL
™
Control on this panel to perform all
functions.
11. Vent Grille.
12. Microwave Inlet Cover. Do not remove or disturb.
13. Oven Cavity Light.
14. Model and Serial Number Plate.
3
1
5
6
4
2
8
7
6
Microwave oven features
To install turntable and support:
•
Remove tape holding the hub (PN 4393754) in
place.
•
Place the support
(PN 4393752) on the cavity
bottom.
•
Place the turntable on the
hub. Make sure the raised,
curved lines in the center of the
turntable bottom are between
the three “spokes” of the hub.
•
The rollers (PN 4393753) on the support should fit
inside the ridge on the bottom of the turntable.
•
The turntable turns both clockwise and counter-
clockwise. This is normal.