Kenwood DPX-4020PH4 - Manual (Page 32)

— 32 —
English Installation ■
Installation
When performing a check of the CD operation prior to installation,
place this unit in a hirizontal position and perform a loading/eject
of the CD.
2CAUTION
Install onto the car bracket using the supplied screws (M5 × 6
mm, M5 × 7 mm). The holes of the car bracket to use will differ
depending on the car model.
When a ground wire is
included in the wiring kit
(which is sold separately),
fasten the ground wire
with the binding screw
located on the rear panel
of this unit.
Accessory2
(M4
× 8 mm)
Accessory1
(M5
× 6 mm)
or Accessory4
(M5
× 7 mm)
Accessory3
(Only for NISSAN car)
03.DPX-4020_M_US_PH4 02.6.3 3:54 PM Page 32