Operation controls – Karcher T 300 User Manual
Page 5
5
OPERATION CONTROLS
Spray Power
Adjust height of propeller spray head.
Clockwise for wood surfaces counter clockwise for stone, concrete and tile.
Air Flow Control
Adjust the hover effect of the T-Racer by pushing the Air Flow Control
into one of the positions from 0 – 1.
The lowest position is 0 and the highest position is 1.
Please Note:
• For optimum setting test the spray power in an unseen area.
• Never operate in the same area for more than 2 seconds, damage may occur
• Do not use on windows..
This manual is related to the following products:
See also other documents in the category Karcher Carwash:
- HD 4000 C (33 pages)
- T350 T-Racer (8 pages)
- G2600XH (40 pages)
- K 5.690 (17 pages)
- HD 3000 DH (12 pages)
- T-RACER T 200 (12 pages)
- K 2.55 (44 pages)
- K9000G (12 pages)
- 460 (12 pages)
- K 520 (12 pages)
- 1750 (12 pages)
- K7000G (7 pages)
- K 2.29 M (12 pages)
- K 3.99M (48 pages)
- K 5.93 (16 pages)
- K 3.79 M (12 pages)
- K 2.080 (12 pages)
- KM 85/50 W B (17 pages)
- K 2.7 (16 pages)
- K 5.68 M (52 pages)
- G 2300 LT (7 pages)
- K 5000 G (12 pages)
- G 2401 OH (40 pages)
- K 4.93 M (12 pages)
- HDS 2000 (16 pages)
- PUZZI 300 (15 pages)
- K 6.450 (16 pages)
- K 2.54 M (12 pages)
- K 2.27 (48 pages)
- K 2.16 (48 pages)
- K 6.85 M (16 pages)
- K 2500 HK (12 pages)
- K 2.300 (16 pages)
- K 2.21 (48 pages)
- G 2800 OH (40 pages)
- G 2600 VC (46 pages)
- K 5.540 (64 pages)
- K 3.91 M (52 pages)
- G2800XC (40 pages)
- K 3.92 M (48 pages)
- K 360 M (12 pages)
- K 370 M (12 pages)
- K 2.360 (52 pages)
- KB 3.99 M (12 pages)