Karcher T 300 - Manual (Page 4)

4
Step 1
Determine the PSI of your pressure washer.
1200–1600 PSI , Select the gray nozzles.
1700–2300 PSI , Select the yellow nozzles.
Step 2
Insert the 2 matching
pressure nozzles in the slots
on the propeller and secure
with cramp.
ASSEMBLY INSTRUCTIONS
Step 6
Insert pressure washer
wand into upper handle.
Push wand down over upper
handle and twist clock-wise
1/4 turn into locked position.
Step 3
Insert upper handle into the
lower handle by twisting
together. Step 4
Insert lower handle into
main housing. Push down
and turn clockwise 90° to
lock in lower handle.
Step 5
Tighten Lock collar to
assemble by twisting
counter clockwise. Step 7
Turn locking collar clock-
wise over pressure washer
wand until tight.
GRAY YELLOW