Karcher K 460 M - Manual (Page 7)

6
WORKING WITH DETERGENTS
Karcher Pressure washers operate at two pressures. The high pressure is used for cleaning,
you cannot apply detergents when working at high pressure. To apply detergents you must
be operating at low pressure.
Caution
Never use:
• Bleach, Chlorine products and other
corrosive chemicals
• Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Step 1
To Install soap nozzle or wash
brush simply insert into the spray wand
extension. Push in and turn clockwise to
lock into position.
Step 2
Fill a container with Karcher
detergent. Place the filter end of detergent
suction tube into the container.
Step 3
Turn on the pressure washer.
Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.