Customizing the picture settings, Selecting the picture size – SRS Labs Plasma Display Panel Television User Manual
Page 16
English - 16
Your television has several setting options that allow you to control the picture
quality.
◆ Contrast – Brightness – Sharpness – Colour – Tint (NTSC only)
◆ Contrast – Brightness – Colour : PC Mode
Press the œ or √ button until you reach the optimal setting.
◆ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
◆ Reset: You can return to the factory defaults picture settings.
➢
The reset function is set for each picture mode and colour tone.
1
Press the MENU (
) button to display the menu.
2
Press the … or † button to select Picture, then press the ENTER/OK (
)
button.
3
Press the ENTER/OK (
) button twice.
4
Select the required mode by pressing the … or † button, then press the ENTER/OK (
) button.
Available modes: Dynamic, Standard, Movie, Custom
5
Select the required option by pressing the … or † button, then press the ENTER/OK (
) button.
6
When you are satisfied with your setting, press the ENTER/OK (
) button.
7
Press the EXIT button to exit.
Customizing the Picture Settings
Mode
Move
Enter
Return
Mode
: Dynamic
Contrast
100
Brightness
50
Sharpness
75
Colour
55
Tint
G 50
R 50
Colour Tone
: Cool1
Reset
TV
Cool2
Cool1
Normal
Warm1
Warm2
Selecting the Picture Size
You can select the picture size which best corresponds to your viewing
requirements.
1
Press the MENU (
) button to display the menu.
2
Press the … or † button to select Picture, then press the ENTER/OK (
)
button.
3
Press the … or † button to select Size, then press the ENTER/OK (
)
button.
4
Select the required option by pressing the … or † button, then press the ENTER/OK (
) button.
Available options: Auto Wide, 16:9, Wide 4:3, Zoom, 4:3
◆ Auto Wide: Expanding and pulling up the picture from 4:3 to 16:9 ratio.
◆ 16:9: Sets the picture to 16:9 wide mode.
◆ Wide 4:3: Magnify the size of the picture more than 4:3.
Move the screen up/down using the … or † button after selecting the
by pressing the √ or
ENTER/OK (
) button.
◆ Zoom: Magnify the size of the picture vertically on screen.
◆ 4:3: Sets the picture to 4:3 normal mode.
5
Press the EXIT button to exit.
➢
If you change the picture size when PIP is On, PIP will automatically be turned Off.
➢
Depending on the input source, the picture size options may vary.
➢
The items available may differ depending on the selected mode.
Positioning and Sizing the screen using Zoom
◆ Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction using
the … or † button as well as the screen size.
◆ Move the screen up/down using the … or † button after selecting the
by pressing the œ or √ button.
◆ Resize the screen vertically using the … or † button after selecting the
by pressing the œ or √ button.
Size
Move
Enter
Return
Auto Wide
16:9
Wide 4:3
Zoom
4:3
TV
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 16