Playing discs in various modes, Controlling tvs with the remote – Sony DVP-M35 User Manual

Page 32

Playing Discs in Various Modes

You can

Turn on or off the TV

Select the input source for the TV

Swiches the wide mode of the TV

Adjust the volume of the TV

Change the channel of the TV

Controlling the TV or the AV
Amplifier (Receiver) with the
Supplied Remote

If you adjust the remote signal, you can control your
TVs with the supplied remote. Default setting is to
control Sony TVs with the g mark.
When you connect the player to a Sony amplifier, you
can also set the input of the amplifier to this player
with the supplied remote .

Controlling TVs with the remote

Hold down POWER, and enter your TV’s
manufacturer’s code in the table below using the
number buttons. Then release POWER.

Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.

Notes

• If you enter a new code number, the code number

previously entered will be erased.

• When you replace the batteries of the remote commander,

the code number automatically resets to 01 (Sony). Reset the
appropriate code number.

TV/VIDEO

VOL

WIDE MODE

You can control your TV using the buttons below.

By pressing

TV POWER

TV/VIDEO

WIDE MODE

VOL

Note

Depending on the TV, you may not be able to control your TV
or to use some buttons above.

POWER

Number
buttons

Manufacturer

Sharp

Aiwa

JVC

Toshiba

Siemens

Thomson

Loewe

Orion

Ferguson

NEC

TEAC

Akai

Nokia

Manufacturer

Sony (default)

Gold Star

Philips

Miver

Blaupunkt

Grundig

Saba

Panasonic

Samsung

Hitachi

Sanyo

Pioneer

Mitsubishi

Code
number

03, 04

06, 08

10, 21

12, 13

17, 49

27, 28, 50

Code
number

47, 48

TV/POWER