Star Trac SPINNER V 7060 - Manual (Page 19)

Page 19 SPINNER
®
OWNER’S GUIDE
RESISTANCE CONTROL
Pedaling resistance is controlled by the resistance knob. Resistance adjustments can be made while riding to vary the intensity of your workout. To
increase resistance, turn the Push Brake System knob clockwise (+); to decrease resistance, turn the knob counterclockwise (-).
NOTE: In case of emergency, you may press directly down on the Push Brake System knob to bring the flywheel to an abrupt stop.
SMART RELEASE™ SYSTEM
Spinner
®
Elite ONLY
Allows the benefits of the direct drive system with a safety clutch to release the crank from the direct drive when a force is applied to the pedals.
Refer to page 29 for Clutch Adjustment Procedures.
V Resistance
Knob
Pro / Elite
Resistance
Knob NXT
Resistance
Knob