Shark HP-5030D - Manual (Page 8)

97-61 • rev. 5/07
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
8
oPeRaTiNg iNSTRUCTioNS
STeP 1: check fuel tank and pump
oil levels on both machines and
connect garden hose to pressure
washer.
CaUTioN: only use fresh
water to this machine.
STeP 2: attach high pressure hose
between pressure washer and ma-
chine. turn garden hose water on.
additional adapters and couplers
may be needed to connect your
brand of pressure washer to the
machine. STeP 4: connect the power cord
into the proper electrical outlet,
then push in the gFci reset button.
start up attached pressure washer
according to the manufacturers in-
structions. When a steady stream of
water flows from the spray gun and
wand the machine is ready for cold
water cleaning.
STeP 4: For hot water washing,
turn the machine burner switch to
the on position. adjust thermostat
to desired temperature setting. (the
burner will light automatically.)
burner
Switch