Samsung 570VTFT - Manual (Page 23)

English 21
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds The monitor is using its power
management system.
Move the computer’s mouse or
press a key on the keyboard PowerSaver,
page 19.
Image is not stable and
may appear to vibrate Check that the display resolution
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings Display Mode,
page 17.
Display Modes,
page 26.
If the setting is not correct, use your
computer utility program to change
the display settings. Installing the Video
Driver, page 7.
NOTE: Your monitor supports multiscan display functions
within the following frequency domain:
Horizontal frequency:
Vertical frequency:
Maximum refresh rate: 30 kHz ~ 61 kHz
50 Hz ~ 75 Hz
1024 x 768 @ 75 Hz
Image is not centered
on the screen Adjust the horizontal and vertical
position. H-Position, page 14.
V-Position, page 14.
You need the monitor
driver software Download the driver from the internet at:
http://www.samsung-monitor.com
http://www.samsungmonitor.com (USA only)
Table 5. Troubleshooting problems – Image (Continued )
What you see... Suggested Action Reference
Appendix
570V560V-E3p-28p Page 21 Wednesday, May 9, 2001 9:23 AM