Siemens SP - Manual (Page 28)

28 29
SP
TRIANO SP hearing instru-
ments have 4 hearing pro-
grams. Three are selected
with a program switch. The
fourth program is activated
as soon as the audio shoe
is plugged to the audio input.
Your hearing specialist will program them
according to your individual needs.
Program switch
The plus (+) side of the battery is always the
smooth side. You can recognize the minus (–) side
by the coloured ring.
You should always keep spare batteries
at hand.
If you feel you cannot change the battery yourself,
ask someone to help you: a family member, friend
or your hearing instrument specialist.
Three useful tips:
Please do not throw used batteries into household
refuse. Return them to your hearing instrument
specialist for environmentally correct disposal.
Caution!
Please keep batteries out of the reach of children. They
are damaging to health when swallowed.
1
2
T
Program“1“
Program“2“
Program“3“
(telecoil)
Function of the program switch without audio shoe
(recommended setting)
Switch position 1 - Program "1"
For the most frequently required hearing situation e.g. at
home or work place
Switch position 2 - Program "2"
For special situations according to your individual needs, e.g.
music.
Switch position T - Program "3"
For telephoning and for using induction loops e.g. in churches,
theatres or lecture rooms.
Using the "T" position for telephoning requires that the tele-
phone is suitable for hearing instruments and emits a corres-
ponding magnetic field. Not all modern phones, especially
cordless telephones and mobile phones produce a magnet
field. In such cases we recommend that you phone, if possible,
with program "1" or "2".
Switching between the positions 1-T-2 is indicated by beep
tones. One beep tone to position "1", two beep tones to
position "2" and three beep tones to position "T".
Function of the program switch with audio shoe
plugged on
The audioprogram is activated as soon as the audio shoe is
plugged on.
Switch position 1 - Program "1"
As without audio shoe
Switch position 2 - audio input mode
The heard signal comes via audio shoe only
Switch position T - Mixed mode
Microphone signal and signal via audio shoe are heard together
Switching between the positions 1-T-2 with audio shoe plugged
on is indicated by beep tones. One beep tone to position "1",
four beep tones to position "2" and "T".
Your hearing instrument specialist can switch off the beeps
if required.