Sharp MD-MT88H - Manual (Page 22)

01/4/4 88UK_4.fm
22
U
s
efu
l Fe
at
ur
es
-Ad
v
anc
e
d Rec
o
rd
ing-
Advanced Recording (continued)
„ Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (Synchronised recording).
To interrupt recording
z When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
z If a silence lasts for 3 seconds or more, the recording
will be paused (pause function does not work for
approximately 10 seconds after a recording starts).
When the unit receives sound again, recording auto-
matically starts.
z A new track number is created when the recording
resumes.
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
Press the or button to adjust the re-
cording level. (See page 12.)
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and
press the PAUSE button.
5
Press the MODE/CHRG button repeatedly
to select the recording mode (page 20).
6
Press the ENTER/SYNC button.
z "SYNC" will be displayed.
z To cancel the operation, press the /:OFF but-
ton.
7
Begin playback on the stereo system. Re-
cording will begin automatically.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)