SharkRack KVM-8 - Manual (Page 12)

KVM-8 Installer/User Guide
6
Basic Installation
7
Connecting your remote peripherals
1. Plug a standard Category 5 Unshielded Twisted Pair (up to 500 feet) into the RJ-45
style modular jack on the rear of the KVM Switch. Make sure the Category 5 cable
you are using is terminated to the EIA (TIA) 568 B standard, commonly used for
10BaseT Ethernet.
2. ate the Category 5 cable to the tna on here you int ne to M la e the condary