SharkRack KVM-8 - Manual (Page 11)

KVM-8 Installer/User Guide
4
Basic Installation
5
2 Basic Installation
Connecting your Local Peripherals
1. Power down all computers that will be part of your KVM Switch system.
2. Locate your keyboard, video monitor and mouse.
3. Plug your VGA monitor cable into the monitor port on the back of your KVM
Switch or plug your 13W3 monitor cable into the included adapter. Either plug your
Sun connector into the port labeled “SUN” or plug your PS/2 keyboard cable and
your PS/2 mouse cable into the keyboard and mouse ports respectively.
Note: A PS/2 keyboard will not function if a Sun keyboard is attached. However, you may use a
PS/2 mouse with a Sun keyboard.