Samsung CL21Z43 - Manual (Page 2)

English - 2
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
“ Setup”.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Remote Control
(depending on the model)
➢ Operation of remote control may be affected by bright
artificial light near to the TV.
➢ This is a special remote control for the visually impaired,
and has Braille points on the POWER, Channel and
Volume buttons.
1 POWER
Turns the TV on and off.
2 Number buttons
Press to select channels
directly on the TV.
3 –
Press to select channels
over 100. For example,
for channel 122, press “-”,
then “2”, then “2”.
4 VOL +, VOL -
Press to increase or
decrease the volume.
5 MENU
Displays the main
on-screen menu.
6 ▲/▼/◄/►
Controls the cursor in the
menu.
7 ENTER
While using the on-screen
menus, press ENTER to
activate (or change) a
particular item.
8 MTS
( Multi-channel Television
Sound)
Press to choose
“Stereo”, “Mono”, or
“SAP” (Secondary Audio
Program).
9 R.SURF
Press to automatically
return to a preferred
channel after a userpreset
time delay.
0 SOURCE
Press to display all of the
available video sources.
! INFO
Press to display
information on the TV
screen.
@ PRE-CH
Tunes to the previous
channel.
# CH , CH
Press to change
channels.
$ EXIT
Press to exit the menu.
% MUTE
Press to temporarily cut
off the sound.
^ SLEEP
Press to select a preset
time interval for automatic
shut off.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
➢ Do not mix battery types, i.e. alkaline and manganese.
AA68-03806S_00Eng_0110.indd 2 2008-01-10 ¿АИД 4:31:02