beautypg.com

Checking your vent, Dryer use – Staber Industries HXD2304E User Manual

Page 4

background image

CHECKING YOUR VENT

You must properly install and vent your dryer to achieve maximum drying efficiency and to
also shorten drying times. To avoid blocking the flow of combustion and ventilation air, use the
minimum recommended installation clearances (found in your Installation Instructions). Refer to
your Installation Instructions for more information.

WARNING: Fire Hazard
• Use a heavy metal vent.
• Do not use a metal foil vent.
• Do not use a plastic vent.
• Failure to follow these instructions can result in death or fire.

The dryer will not be covered under the warranty if it is not properly installed and vented.

NOTE: Whether it was a paid installation or self-installed, service calls caused by improper venting
will be paid for by the customer.
PLEASE REFER TO PAGE 6 OF THE WHIRLPOOL USE & CARE GUIDE FOR FURTHER VENTING
INSTRUCTIONS.

DRYER USE

STARTING YOUR DRYER

WARNING: Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from dryer.
Do not dry anything that has ever had anything flammable on it (even after washing).
Failure to follow these instructions can result in death, explosion, or fire.

WARNING: Fire Hazard
• No washer can completely remove oil.
• Do not dry anything that has ever had any type of oil on it (including cooking oils).
• Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air

Cycle.

• Failure to follow these instructions can result in death or fire.

Wipe the dryer drum with a damp cloth to remove dust from storing and shipping before using
your dryer.
1 Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space for

clothes to tumble freely.

2 Turn the control dial to the recommended cycle for the type of load being dried. Use the

Energy Preferred Automatic Setting* to dry most heavyweight and medium weight loads. See
“Drying, Cycle, and Temperature Tips.”

3 Select a HEAT setting for appropriate temperature.
4 Press the START button.

STOPPING AND RESTARTING

Any time during a cycle you can stop your dryer.
TO STOP YOUR DRYER
Open the dryer door or turn the control dial to OFF.
NOTE: When the dryer is not in use the control dial should point to an OFF area.

4

This manual is related to the following products: