SIIG 04-0725A - Manual (Page 5)

5
Windows XP (32-/64-bit) / Server 2003 (32-/
64-bit) / 2000
1. At the Windows desktop insert the driver
CD.
Note: Most systems will start installing the
driver once the driver CD is inserted. If so,
skip step #2 and go directly to step #3.
2. If AutoPlay doesn't start, click Start, Run,
type D:\autorun.exe, then click OK.
(Change D: to match your CD-ROM drive
letter).
3. At USB to Serial Adapter screen, click Install
Driver, then click USB 2/4/8-Port Serial.
4. At High-Speed USB MultiSerial Device
Drivers Setup box, click Install.
5. At High-Speed USB MultiSerial Device
Drivers Setup box prompt Installation
completed, click Exit.
6. Plug the Serial Adapter into an available
USB port and the drivers will install
automatically. The device is ready for use.