SIIG 04-0725A - Manual (Page 4)

4
Windows Vista (32-/64-bit)
1. At the Windows desktop insert the driver
CD.
At the AutoPlay box: Click Run autorun.exe.
If AutoPlay doesn't start: Click Start, in the
Search programs and files box, type
D:\autorun.exe, then press Enter. (Change
D: to match your CD-ROM drive letter)
2. At USB to Serial Adapter screen, click Install
Driver, then click USB 2/4/8-Port Serial.
3. Click Allow.
4. At High-Speed USB MultiSerial Device
Drivers Setup box, click Install.
5. At High-Speed USB MultiSerial Device
Drivers Setup box prompt Installation
completed, click Exit.
6. Plug the Serial Adapter into an available
USB port and the drivers will install
automatically. The device is ready for use.