Sundance Spas 7'7-inch x 7'7-inch and Smaller - Manual (Page 13)

Step 23
Have an assistant hold the hip rafter in
position. Place a "Y" Bracket [19] as
shown in Diagram 23 and attach with
1-5/8" screws. The "Y" brackets are
pre-drilled.
Step 24
Repeat the procedure for attaching the "Y"
brackets to the remaining three hip rafters.
The completed "Y" brackets should appear
as shown in Diagram 24.
Pro Tip: Do not attach the mid rafters yet.
That comes later.
Pro Tip: You will need an assistant for this
next step.
Step 25
Position yourself and your assistant on
opposite sides of the roof box/hip rafter
assembly. Grasp the roof header box.
Lift the assembly and carefully flip it
over. Place the roof assembly on top of
the gazebo wall as shown in Diagram
25.
12 Sundance Spas Gazebos Installation Instructions WillowWood
Square "Y" bracket to
Roof Box first, then
align the rafter to
the bracket
Secure this
end LAST
Secure this
end THIRD
Secure this
end SECOND
Secure this
end FIRST
Diagram 23
Diagram 24
Place roof assembly on top of
gazebo wall as shown
Diagram 25