Settings, Settings via phone – Snom VoIP Phone User Manual

Page 46

Settings

6. Settings

A long list of different settings is available that can be used to control
the behavior of the snom220. These settings are explained in the FAQ

“Configuring snom phones for Mass Deployment”, which you will find
under http://www.snom.com/faq_en.php. The FAQ “How can I

update a snom phone?” describes the different options available to
update the phone, also via setting file.

The settings can be specified in different ways:
Via the phone
Via web browser on a PC

Settings via Phone

Press the MENU key

in the idle state of the phone. With the

function keys

and

you can navigate in the menu. Scroll to

the submenu “Settings” and press ENTER

You are now in the “Settings” menu, which has the following submenus:

Redirection
Base
SIP
Codecs
Miscellaneous
Network
Key Mapping
Administrator Mode
Reset Values

Use the keys

and

to scroll within the “Settings” menu. Press

the ENTER key to select a submenu.
Now the list of settings of the selected submenu is displayed. Use the

and

to scroll within the list. By pressing ENTER

the value

of the setting can be viewed or modified.

Some entries cannot be set to any variable value. Instead they offer a
list of allowed values from which one has to be selected. Use the

and

to scroll within the list to set the desired value. Press ENTER

to set the value. Press CANCEL

if you decide not to change the

value.