Smart Technologies SMART Hub SE240 - Manual (Page 34)

28 | CHAPTER 2 – CONFIGURING YOUR HUB
ShutdownTimeout • 15 minutes
• 30 minutes
• 45 minutes
• 60 minutes
• No timeout
Sets the elapsed time before a
configured projector
turns off.
bridBridgitServer User defined Provides the server’s name. For
example,
bridgit.smarttech.com
(SE240 only).
bridViewPassword User defined Shows the for the SMART
Bridgit server
(SE240 only).
bridCreatePassword User defined Creates a meeting for the
SMART Bridgit server (SE240
only).
bridDefaultConf User defined Default SMART Bridgit meeting
name, unless otherwise
specified (SE240 only).
bridEnabled • false
• true
Enables SMART Bridgit
conferencing (SE240 only).
DVI1Label User defined DVI #1 Input label
DVI2Label User defined DVI #2 Input label
(SE240 only).
SVideoLabel User defined S-Video Input label
(SE240 only).
CompositeLabel User defined Composite Input label
(SE 240 only).
SMTP Enable • false
• true
Enables SMTP support.
SMTPServer User defined Uses the SMTP server. For
instance mail.smarttech.com.
SMTPPortNum User defined Use 25 as the default number for
the SMTP port.
TFTPServer User defined Use the TFTP server to
configure your hub.
Key Value Description