Sierra Wireless 350 User Manual
User guide, Welcome to the airbooster™ 350 rf amplifier, Your airbooster 350 components

User Guide
o Welcome
o Overview
o
o
o
o
o
o
2110195 Rev 1.0
December 1999
Welcome to the AirBooster™ 350 RF amplifier
The AirBooster 350 is an intelligent RF amplifier for boosting some Sierra
Wireless Class III (600mW)
to Class I (3W). The amplifier is
an "intelligent" booster in that it does not simply apply a fixed gain to a
varying input RF level as a linear amplifier would. Instead, the AirBooster
amplifier takes a constant RF level from the CDPD device and applies as
much gain as the CDPD system requires at that moment.
A
GPS Option
is also available, adding a GPS receiver inside the package.
This is available as a field upgrade kit or pre-installed at the factory.
Documentation related to GPS is covered in a
separate section
.
Your AirBooster 350 Components
All AirBooster 350 packages will include the following components:
AirBooster
™
350 RF amplifier.
●
Power Cable.
●
Sierra Wireless Product CD-ROM with this Documentation including a
3 Year Warranty
.
●
4 Screws with Washers.
●
Mounting Template.
●
Quick Start Guide.
●
Units with the factory installed GPS option will also include:
DB-9 Serial Cable.
●
Additional accessories are available from
. These include:
RF Connector Cables (an assortment of lengths and connector options
are available).
●
GPS Options (Factory Installed or Field Upgrade Kit).
●
GPS antennas (Magnetic or Hard Mount options).
●
For details on these and other Sierra Wireless accessories
contact sales
or
visit
.
Supported Products
At the time of this writing, the AirBooster 350 RF amplifier is supported by
the following Sierra Wireless products:
AirCard
®
350 CDPD Adapter
●
SB300 OEM Module
●